CHT-4AMV Series
(CHT) Ceramic Hybrid Technology
mV Compensated, Constant Voltage, DIP Sensor
Features
- Dual In Line (DIP) Package
- Constant Voltage
- SDX Discontinued Replacement
- Temperature Compensated
- Top & Sideport Barb Ports
- 0.1% High Accuracy (Typical)
- Normalized Fixed Output
- High mV output
About the CHT-4A MV
Advanced Sensor Ceramic Hybrid Technology (CHT) 4A MV Series is a temperature compensated, mV output, PCB mounted pressure sensor packaged in a rugged Dual In Line package. The Ceramic Hybrid Technology uses a silicon MEMS pressure sensor bound to a ceramic substrate containing thick film resistors that are uniquely laser trimmed for each sensor. Incorporating a flexible design, the Series is available with side port, top ports or manifold mounted ports and can be mounted with SMT pin, Dual in line pin or in line pin to allow OEMs to optimize their board design. The CHT-4A MV series is powered using constant voltage, the tight span control will ensure sensor field interchangeability.
CHT-4A MV series superior die performance, coupled with rugged ceramic substrate ensures long term stability with superior temperature performance over wide operating range.
SPECIFICATIONS
Performance
Accuracy
±0.25 %FSS
Stability (1 Yr)
±0.40 %FSS
Hysteresis & Repeatabillity
±0.05 %FSS (Typical)
Response Time
< 100 uS
Thermal
Operating Temperature
-40 to 125 ̊C
Compensated Temperature
0 to 50 ̊C
Thermal Error, Offset
-0.5 to 0.5 %FSS
Thermal Error, Span
-0.5 to 0.5 %FSS
Electrical
Output
80 mV Full Scale Span (FSS)
Excitation
0.5-16 Vdc
Offset
-1.5 to 1.5 mV
Bridge Resistance
1500 to 12.0KΩ
Maximium Ratings
Excitation
10Vdc
Storage Temperature
-50 to 150 ̊C
Over Pressure
10x Range (Topside)
Media Comptabilty
Non Corrosive Gases
Model Number Configuration
Mechanical Dimensions
Contact Our Sales Team
Have questions? Need a quote? We are ready to help as a member of our sales team will contact you to discuss your requirements.